Diagnostic Test Mode I – Bulbs Check

MIL should turn on when the ignition is turned ON (engine stopped), and turn off after the engine start.

Diagnostic Test Mode I – Malfunction Warning

1. When a malfunction is detected by self-diagnosis, the system goes into the malfunction warning mode and warns the driver by blinking the MIL in the Dash Display.

Diagnostic Test Mode II – Self-Diagnostic Results

1. In this mode, the MIL blinks (indicating the DTC) to indentify the system that returned a malfunction.
2. If no malfunction is detected, the code “0000” is displayed.